Operation Manual

35
33
33
Changing the FM channel
Channel changing is recommended if the channel being
used is experiencing interference, or if other users are using
the same FM channel nearby.
 Press the
+
and
F
keys
together. The channel indicator
on the display will begin flashing.
Channel indicator
 Press
+
to move up a channel or
–
to move down
a channel.
SmartLink+ resumes normal mode 10 seconds after the last key
press. The channel indicator stops flashing and the FM receivers
are synchronized. Make sure that SmartLink+ is within 8 inches
(20cm) of the FM receivers – otherwise these receivers may not
be synchronized.