Operation Manual

20
Practical SmartLink+ use cases
How to use SmartLink+:
 Place it on the table. If using the Zoom setting, the front of
SmartLink+ (where the lavalier is attached) should point to
the speaker or speakers you want to hear.
If using the omni setting, the orientation of SmartLink+
makes no difference as sound is picked up from all angles.
 Make sure the lavalier is not folded or knotted.
 Switch ON SmartLink+ by holding down one of its 3 microphone
buttons.
Recommended SmartLink+ settings:
Zoom (wide-angle sound pickup)
Omni (360° sound pickup),
to be used in low background noise