Operation Manual

14
Getting started
Automatic program selection
At start-up, SmartLink+ automatically selects the most recently
used FM channel.
SmartLink+ automatically synchronizes Phonak receivers to this
channel, providing the distance between SmartLink+ and these
receivers is less than 8-10 inches (20cm).
You may hear a beep tone when the synchronization is completed.
For customers using Phonak hearing instruments that are
compatible with analog remote controls:
 At start-up, SmartLink+ automatically sets digital Phonak
hearing instruments with remote control compatibility to the
“FM + M“ program. Your hearing care professional can change
this setting to “FM only”, if required.
 At switch-OFF, SmartLink+ automatically resets digital Phonak
hearing instruments with remote control compatibility to the
hearing instrument program.
 Hearing instruments need to be within the operating range of
the remote control built into SmartLink+. This range is usually
8-10 inches (20cm).