Operation Manual

52 53
16.11 Reconguration
Resets Roger Touchscreen Mic’s language settings to
factory “out of the box” settings.
How to use it:
• Select Activate/Deactivate (default)
When activated, you will be asked to select the
microphone’s language the next time it is turned on.
When deactivated, the currently selected language will be
kept when microphone is turned o.
16.12 Verication mode
Used by professionals to verify a device according to the
Roger POP (Phonak Oset Protocol). When Verication
mode has been activated, an orange banner will be
displayed below the status bar.
How to use it:
• Select Activate/Deactivate (default)
Verication mode is automatically deactivated when
microphone is rebooted (turned o and back on).
16.13 Quick menu
Locks most icons (see below) in order to avoid unintended
use. Requires a passcode to be activated.
All icons will be locked except: Connect, Check, Disconnect,
Settings (since these four icons are essential for daily use
of the microphone). Physical buttons will not be locked.
How to set passcode:
• Select Set passcode
• Set a four-digit passcode
• To delete the last digit, tap X (on right)
• When done, tap Home
How to change passcode:
• Tap Settings
• Enter passcode
• Select Quick menu
• Select Change passcode
• Enter new passcode
Connect Check Disconnect Settings