Operation Manual

49
Roger inspiro does not respond to commands
J Software issue
FM receiver cannot be connected to Roger inspiro
J FM application mode is not
active
Whistling sound from Roger DigiMaster loudspeaker
J Audio feedback between
loudspeaker and microphone
Interruptions in audio transmission
J Distance between Roger
inspiro and receivers is too
large
Volume of Audio Line-in device is too low
J Incorrect volume settings
J Reboot Roger inspiro by
simultaneously pressing its
four side buttons
J Select the Roger + FM
application mode under
Settings / Modes / Application
Mode
J Move away from Roger
DigiMaster loudspeaker and /
or reduce Roger inspiro’s
volume
J Reduce distance between
Roger inspiro and receivers
J Increase volume on audio
source or change audio input
settings on Roger inspiro
Most probable cause Solution