Operation Manual

48
The following is a summary of frequently asked questions
and the answers to them.
Most probable cause
Roger inspiro cannot be switched on
J The battery is run down
Poor speech intelligibility
J The microphone is not
positioned properly
Speaker’s voice is inaudible even though Roger inspiro is
turned on
J The microphone has been
muted. Or…
J The hearing device has not
been set to the correct
program. Or…
J The Roger Dynamic SoundField
system has not been correctly
set-up. Or…
J SubNet function is activated
6. Troubleshooting
Solution
J Charge the Roger inspiro for
at least two hours
J Move the microphone closer
to the speaker’s mouth
J Check Roger inspiro’s screen
display and press the
microphone mute key in order
to activate the microphone
J Connect the receiver and
check that it is set to the
correct mode (DAI, EXT,FM)
J Connect or switch on or
check the volume settings of
the Roger Dynamic SoundField
system
J Press EndSub