Operation Manual

43
J The audio symbol will appear on the Roger
inspiro’s display.
Each type of audio device has a specific audio impedance
output. Roger inspiro’s audio input type can be set to
reflect this more accurately.
How to set the Roger inspiro audio input:
J Go to: Settings / audio input
J Select the audio device and press
.
I For permanent connection between an audio device
and Roger inspiro, it is recommended to use the
Roger AudioHub device. This product allows one or
two audio sources to be wirelessly connected to
Roger inspiro, Roger DigiMaster devices and Phonak
receivers.
5.16 Verification mode
The Verification mode is a mode for Professionals to
verify a device according to the iPOP (Phonak Operation
Protocol).