Operation Manual

29
J Hold Roger inspiro less than 10 cm (4 inches) from
the receiver and press Connect.
To go back to the main network:
J Press the EndSub left softkey.
J Hold Roger inspiro less than 10 cm (4 inches) from
the receiver and press Connect.
4.6 Using Roger inspiro to check devices (Check)
A network device’s data can be checked wirelessly
using Roger inspiro.
Several types of data can be checked:
J Network status
J Link quality of connected devices
J Stored device data
J Roger DynaMic battery status
How to check a device:
J Turn Roger inspiro and the device on.
J Hold Roger inspiro within 10 cm (4 inches) of the
device.