Operation Manual

25
4.2.2 Connecting FM receivers
An unlimited number of FM receivers can be connected
to Roger inspiro when Roger inspiro is in its Roger +
FM application mode. The receivers must be attached to
their respective hearing aids and these aids turned on.
How to connect:
J Turn Roger inspiro on.
J Hold Roger inspiro within 10 cm (4 inches) of the
receiver.
J Ear-level receivers must be attached to their respective
hearing aids and these hearing aids turned on.
Body-worn receivers must be switched on.
J Press the Roger inspiro’s right Connect softkey. The
receiver will sound confirmation beeps.
J The receiver is now connected with Roger inspiro and
the Talker can talk into the Roger inspiro microphone.
Repeat these steps to connect any additional receivers.
I Roger and FM receivers can be used simultaneously
with the same Roger inspiro.