Operation Manual

24
4.2.1 Connecting Roger receivers
An unlimited number of Roger receivers can be
connected with Roger inspiro.
How to connect:
J Turn Roger inspiro on.
J Hold Roger inspiro within 10 cm (4 inches) of the
Roger receiver.
J Ear-level Roger receivers must be attached to their
respective hearing aids and these hearing aids
turned on. Body-worn Roger receivers must be
switched on.
J Press the Roger inspiro’s right Connect softkey.
The receiver will sound confirmation beeps.
J The Roger receiver is now connected with Roger inspiro
and the Talker can talk into the Roger inspiro
microphone. Repeat these steps to connect any
additional receivers.
4. Using Roger inspiro