Operation Manual

30
5. Special use cases
5.5 Deleting all Bluetooth pairings
If you encounter problems with one of the paired devices,
or if a device stops connecting to your RemoteMic, you
may consider deleting all pairings from the RemoteMic.
J Turn the RemoteMic on while
pushing the button.
J Release the button after
10 seconds when the blue
blinking light turns green.
Deleting the pairing of Bluetooth devices means you will
not be able to connect to any previously paired
Bluetooth device. You will need to perform the pairing
process again (see 3.3) if you wish to reconnect.
The indicator lights will start to rapidly blink blue a
few seconds after pairings were deleted (automatic
pairing mode).