Instruction Manual

Table Of Contents

Roger NeckLoop can be connected to a computer, tablet or smartphone to generate live, automated captions using 3rd party

speech-to-text software.

Preparations

1. Ensure your Roger NeckLoop and your Roger microphone are charged.

2. Ensure you have a 3rd party speech-to-text, live transcribe or dictation application installed on your computer,

smartphone or tablet.

Connection to computer

You need:

The included USB-C to USB-A cable.

1. Connect the USB cable to the Roger NeckLoop and your computer:

2. Turn Roger NeckLoop on.

Roger NeckLoop for

peech-to-text

Installation

instructions

PAGE 1
Roger NeckLoop for speech-to-text Installation instructions Roger NeckLoop can be connected to a computer, tablet or smartphone to generate live, automated captions using 3rd party speech-to-text software. Preparations 1. 2. Ensure your Roger NeckLoop and your Roger microphone are charged. Ensure you have a 3rd party speech-to-text, live transcribe or dictation application installed on your computer, smartphone or tablet. Connection to computer You need: The included USB-C to USB-A cable. 1.
PAGE 2
3. On your computer, check that Roger NeckLoop is selected as the input source (sound settings): 4. Run the speech-to-text software (3rd party application) on your computer. Alternatively, you can also run the ‘Dictate’ feature in Microsoft Word: 5. Now speak into the Roger microphone and the speech-to-text software or MS Word will transcribe the spoken words into text.