Operation Manual

31
30
Important points
Do not use two transmitters on the same FM channel.
Switch MyLink off when you enter a room with an
activated loop system.
Do not use water or fluids for cleaning.
It is recommended to use Phonak C&C Line products.
Your hearing care professional will be glad to
advise you.
Use original Phonak accessories only.
Be aware that FM signals might also be picked
up and overheard by other receivers.
Before using MyLink and the transmitter in another
country, contact your hearing care professional to
make sure your radio channels are permitted in that
country.
MyLink may only be repaired at an authorized
service center.
With the CE symbol, Phonak indicates that
MyLink products and accessories meet Directive
93/42/EEC concerning Medical Devices.
This symbol indicates that MyLink products
meet the requirements of a Type BF component
containing EN 60601-1.
Security advice
Can be attached to external units tested according
to relevant IEC norm only. Use accessories approved
by Phonak AG only.
User instructions
MyLink is designed to work trouble-free under all
common climatic conditions.
Transportation and storage requirements
During transportation or storage, temperature should
not fall below –20° Celsius or exceed 60° Celsius
and relative humidity should not exceed 65%. Air
pressure between 500 and 1100 hPa is acceptable.