Operation Manual

26
MyLink+ is a Dynamic FM receiver with digital frequency
synchronization which allows wireless frequency
change. There are mainly two reasons which could
make a frequency change necessary:
J External interferences on the channel normally used
Check the user guide for the transmitter to change
the standard frequency of the transmitter and to syn-
chronize MyLink+.
J The need to pick up signals from another transmitter
(EasyLink+ or ZoomLink+)
Make sure the distance between the other transmitter
and MyLink+ is less than 20 cm (8 inches).
To synchronize MyLink+, switch the other transmitter
ON (or OFF and ON).
Speak into the other transmitter to check whether
speech is audible in the hearing instrument through
the MyLink+ receiver.
12. Frequency synchronization