Operation Manual

54
14. Using DynaMic
14.1 Common use situations
J DynaMic situated on a child’s desk, using the supplied table
stand
J Holding DynaMic in the hand
J Wearing the remote mic with a lavalier – not supplied by Phonak
J Using a floor stand – not supplied by Phonak
14.2 Passaround microphone
DynaMic can be passed from one speaker to the next.
14.3 Talking
inspiro – Follow all the steps described in the chapter „Talking“,
inspiro chapter page 27.
DynaMic – Make sure DynaMic:
J Is recognized into the MultiTalker Network by the
initiator inspiro. You can check via the inspiro’s LCD.
J Is within range of the MultiTalker Network
J Is turned ON
J Is not muted
Speak into the microphone at relatively
close range, 5-30 cm / 2-12 inches.
When speaking do not cover:
J the head of the microphone
J the antenna