Operation Manual
48
12. Controls
a Slider OFF/MUTE/ON
The slider puts DynaMic in one of its three modes.
b RESET button
This allows DynaMic to be reset. The parameters stored
are not affected by this operation. Use a pen to press the
button.
c Built-in vibration alarm
The vibration alarm provides information on the status of
the battery and operation.
d FM Antenna
Emits FM to those FM receivers attached to hearing
instruments.
e mini-USB interface
Interface for charging and programming.
f The LED indicates the following:
Jbattery status
Jcharging
J error states
b
d
f
a
e
c