Operation Manual

45
With inspiro Premium transmitters running firmware
version 3.0 or higher, the application mode can be
changed directly on the inspiro.
To change the application mode, switch inspiro ON.
When the battery symbol appears, press “OK” and the
left soft key (C) simultaneously (shown below), then
press “OK” (D) again.
Select the application mode required
9. Changing the application mode*
(‘FM’, ‘SoundField‘, ‘SoundField + FM’)
0 1 :57 p m
Vol Down
0 6 . 0 7 . 1 0
Vol Up
0 1 : 5 7 p m
Vol Down
0 6 . 0 7 . 1 0
Vol Up
(C)
(D)
* applicable to inspiro Premium only!