Operation Manual

25
Changing the FM channel
If the radio channel used in EasyLink+ is frequently disturbed
by an external source of interference, the hearing care professional
can switch EasyLink+ to another radio channel.
1) Switch ON EasyLink+ by pressing the ON/OFF button for
one second.
2) Using a pen, press the push button, as pictured. After one
second, the channel displayed in the LCD will change.
Hold the button down until the desired channel is displayed.
3) Release the button. The channel number in the LCD
will stop blinking after a few seconds.
4) Set the default channel of
the MyLink or MicroLink
receivers to the same channel
using the FM SuccessWare.
For professionals