Operation Manual

12
Getting started
Switching EasyLink+ ON/OFF
At start-up, EasyLink+ automatically selects the most recently
used FM channel.
EasyLink+ automatically synchronizes Phonak multichannel
receivers to this channel, if the distance between EasyLink+ and
the Phonak receivers is less than approximately 8–10 inches
(20cm).
You may hear a beep tone when the synchronization is completed.
For customers using Phonak hearing instruments that are
compatible with analog remote controls:
 At start-up, EasyLink+ automatically sets digital Phonak hearing
instruments with remote control compatibility to the “FM + M“
program. Your hearing care professional can change this setting
to “FM only”, if required.
 At switch-OFF, EasyLink+ automatically resets digital Phonak
hearing instruments with remote control compatibility to the
hearing instrument program.
 Hearing instruments need to be within the operating
range of the remote control built into EasyLink+. This range
is approximately 8–10 inches (20cm).