Operation Manual

13
It is safe to leave EasyCall connected to the
charger overnight.
The full performance of a new battery is achieved
only after three complete charge and discharge
cycles.
3.4 Switching On or O
Press and hold the call button
(2 sec.) to switch EasyCall on or o.
The integrated indicator light
J will turn green when switching on.
J will turn red when switching o.
Pressing the button twice within 2 seconds will also
switch on EasyCall.
Release the button immediately after turning red to
avoid the start of Bluetooth pairing.
If a phone is not connected for 60 minutes, EasyCall
will automatically switch o.