User's Guide

48 49
3.
Rotate the changing tool
clock-wise runtil some
resistance is felt.
Pull the changing tool out of
the speaker with the used wax
lter attached to the end.
4.
Insert the used wax lter into
the dispensing slot in the
middle of the wax lter
dispenser.
18.2.3 Inserting a new wax lter
5.
Slide the changing tool to
either side of the dispensing
slot. Lift the changing tool up,
leaving the used wax lter in
dispensing slot.
1.
After removing the used wax
lter from the speaker of the
hearing aid, brush away any
remaining debris.
Rotate the ridged disk of the
wax lter dispenser until a
new wax lter is visible in the
window of the disk.