Operation Manual

10
11
3. Technical specications
Driver: Dual balanced armature
Frequency response: 5 Hz–17 kHz
Sensitivity: Gray lter 109 dBSPL/mW, 1 kHz
Black lter 107 dBSPL/mW, 1 kHz
Green lter 104 dBSPL/mW, 1 kHz
Nominal Impedance: 47 ohm
Weight: 16g/0.5oz
Plug with mic: 3.5 mm 4 pole jack
Plug without mic: 3.5 mm 3 pole jack
Cable length: 120 cm/3.9 ft
4. How to use Audéo PFE 232
Only use Audéo PFE with original parts. Never use accessories
from other manufacturers. They are not compatible with
Audéo PFE and can modify the frequency response of your
earphones, damage them or even cause injury! Original
accessories can be purchased from authorized Audéo PFE dealers
or on the website www.audeoworld.com
4.1. Ear tips
The Audéo PFE come with both silicone and Comply
TM
foam
tips; the silicone ear tips are better for use during exercise.
The Comply
TM
foam tips are better at ltering out ambient
noise, making them the best choice for travel or use in noisy
surroundings.
To change the ear tips (foam or silicone), hold the ear tip in the
middle and pull it slowly until it comes loose. Do not use your
ngernails or any other sharp object to remove the ear tips, as
otherwise they could be damaged. If you are using Comply
TM
foam tips, compress them with your ngers before wearing the
earphones.