Technical data

TRIO-PS/1AC/24DC/5
102777_02_en PHOENIX CONTACT 10
Input AC
100-240 V
Adjust
22.5-29.5V
DC OK
Output DC
24 V
5
A
–
+
–
+
–
L
N
TRIO POWER
Input
Protection of the primary side
The device must be installed in acc. with the regulations as
in EN 60950. It must be possible to disconnect the device
using a suitable isolating facility outside the power supply.
The primary side line protection, for example, is suitable. For
device protection, there is an internal fuse. Additional device
protection is not necessary.
Recommended backup fuse for mains protection
Power circuit-breaker 6 A, 10 A or 16 A, characteristic B (or
identical function).
If an internal fuse is triggered, there is most
probably a malfunction in the device. In this
case, the device must be inspected in the
factory!