Manual

ManualsBrandsPhoenix ManualsFirearmssmartflash 99n

PHOENIX

SmartFlash

DIGITAL AUTOFOCUS FLASH

SPECIFICATIONS:

Guide Number: 30m 199ft (ISO 100@50mm)

42m I 138ft (ISO 200@50mm)

Circuitry: IGBT and series circuitry

Automatic TTL Range: 15m 150ft (F2.0)

AF Illumination: 8m 126ft

Dedication:

For Canon

For Nikon

Exposure check:

Color Temperature:

Zoom Head Position:

Bounce Adjustment:

Flash Duration:

Recycling Time:

Number of flashes:

Power Source:

E-TTL I E-TTL II

iTTL

Green Auto Check Light

Daylight 5600K

18mm to 55mm (APS-C size)

28mm to 85mm (35mm film)

0 -

90.

11700 sec. (Full power)

0.5 -7 sec.

100

300 per set of new batteries

4 AA Batteries

(Alkaline. NiCd or NiMH)

150 x 45 x 70

210 grams (w/o batteries)

Dimension (mm):

Weight:

Summary of content (4 pages)

PAGE 1
PHOENIX SmartFlash DIGITAL AUTOFOCUS 99 FLASH SPECIFICATIONS: Guide Number: 30m 199ft (ISO 100@50mm) 42m I 138ft (ISO 200@50mm) Circuitry: IGBT and series circuitry Automatic TTL Range: 15m 150ft (F2.0) AF Illumination: 8m 126ft Dedication: E-TTL I E-TTL II - For Canon - For Nikon Exposure check: iTTL Green Auto Check Light Color Temperature: Daylight Zoom Head Position: 18mm to 55mm (APS-C 5600K size) 28mm to 85mm (35mm film) - 90. Bounce Adjustment: 0 Flash Duration: 11700 sec.
PAGE 2
NOMENCLATURE .
PAGE 3
PLEASE READ BEFORE IMPORTANT NOTES AND MAINTAINANCE YOU USE THE FLASH FOR FLASH PHOTOGRAPHY 1. For best flash photography results, set your ISO to 200 and above in both indoor and outdoor. After each picture, wait for at least 4-5 seconds for the flash to be fully charged before taking the next shot even though the ready light is on. This will help to prolong the lifespan of the flash tube as well as to attain the full charging capacity of the flash capacitor for precise flash photography, 3.
PAGE 4
infra-red assistance beam will turn on automatically to assist the camera to focus in low lighting conditions. TTL AV, TV AND M MODE When this flash unit is used in AV, 1V or M mode, the flash exposure will be automatically controlled by the camera based on the combination of shutter speed and aperture value. -For TV speed. caused mode. do In AV mode, by handshake. not exceed the maximum camera's nash synchronization setting at a slow speed will usually result in blur pidures In such situation.