Technical data

Konfiguration und Diagnose
6874_de_10 PHOENIX CONTACT 4-39
– Event Table cleared.
– Password has been changed.
– Password has not been changed successfully.
– Configuration has been saved.
– The configuration has been modified the first time after the last storing.
– Memory Module recognized.
– Memory Module removed.
– Memory Module cleared.
– Configuration File Transfer successfully executed.
– Configuration File Transfer was not successfully executed.
– Firmware Update was successfully executed.
– Firmware Update was not successfully executed.
– Link up at port xy.
– Link down at port xy.
– Enabling port xy.
– Disabling port xy.
– Unpermitted mac address at port xy.
– RSTP enabled.
– RSTP disabled.
– RSTP topologie changed.
– RSTP elected this switch as new root.
– IGMP Snooping enabled.
– IGMP Snooping disabled.
– IGMP Querier enabled.
– IGMP Querier disabled.
– Better query received.
– Better query received in vlan xy.
– Become active querier.
– Become active querier in vlan xy.
– GVRP enabled.
– GVRP disabled.
– Power Supply US1 lost.
– Power Supply US2 lost.
– Power Supply US1 and US2 are connected now.
– LLDP Agent enabled.
– LLDP Agent disabled.
– LLDP recognized new neighbor at port xy.
– LLDP neighborhood information changed at port xy.
– LLDP neighbor information become obsolete at port xy.
– Power over Ethernet fault detected at least one port.
– No Power over Ethernet faults detected any more.
– One of the interface modules is not supported by the system hardware. The interface
will be able to send or receive data but can not be diagnosed.
– A Profinet connection was established.
– The Profinet connection was terminated.
– Diagnosable POF module: OK on port xy.