User manual

Configuration and Diagnostics
6874_en_09 PHOENIX CONTACT 4-23
Device Replacement
"Configuration Management/Memory Module" Menu
This web page provides an overview of the configuration in the memory module and
indicates which configuration was used during booting.
Memory Module
Figure 4-28 "Memory Module" web page
Configuration comparison Here you can compare the configuration on the memory module with the configuration in
the head station memory. The result is displayed in text format. In addition, the result is
displayed in encoded form (see also "Meaning of the 7-Segment Display" on page 1-14).
Figure 4-29 "Configuration comparison" web page
Clear Memory Module Here, you can delete the memory module by entering a valid password.
Configuration using a configuration file is used when replacing devices. To duplicate
devices using a configuration file, observe the following:
– Create a point-to-point connection between a MMS and the management station.
– Load the configuration file on the MMS.
– Reset the MMS.
– Adjust the IP parameters.
– Save the configuration ("Save current configuration" function).
The duplicated switch can now be operated in the network using the adjusted IP
parameters.
If you replace the memory module with another memory module within a few seconds,
there is no need to update the configuration comparison manually.