User manual

FL SWITCH MM HS
4-22
PHOENIX CONTACT 6874_en_09
Load the last stored
configuration
This option can be used to reactivate the last configuration saved in the memory module
or on the device. All modifications made to the configuration since it was last saved are lost.
Figure 4-26 "Load the last stored configuration" web page
"Configuration Management/File Transfer" Menu
Configuration file transfer This option can be used to save your device configuration on a PC or to operate the switch
using a saved configuration.
Figure 4-27 "Configuration file transfer" web page
When a configuration is uploaded from the MMS to a PC, the last saved version is
transmitted. If you want to transmit the active configuration, first save it again ("Save
current configuration" function).
When a configuration is downloaded from the PC to a MMS, the new configuration is only
activated once the switch has been reset.
The use of a configuration file does not affect an existing ("old") password.