User manual

Table of Contents
6874_en_09 PHOENIX CONTACT iii
5.2.1 Enabling (R)STP on All Switches Involved .........................................5-2
5.2.2 Connection Failure - Example ..........................................................5-11
5.2.3 Mixed Operation of RSTP and STP ..................................................5-12
5.2.4 Topology Detection of a Rapid Spanning Tree Network (RSTP) ..... 5-12
5.2.5 Configuration Notes for Rapid Spanning Tree ..................................5-15
6 Multicast Filtering....................................................................................................................6-1
6.1 Basics.................................................................................................................6-1
6.2 Enabling the Web Pages for Multicast Filtering in WBM....................................6-1
6.3 Static Multicast Groups ......................................................................................6-1
6.3.1 "Current Multicast Groups" Web Page ...............................................6-2
6.3.2 Creating Static Multicast Groups ........................................................6-2
6.3.3 Procedure for Creating a Multicast Group ..........................................6-5
6.4.1 Internet Group Management Protocol (IGMP) ....................................6-7
6.4.2 "General Multicast Configuration" Web Page .....................................6-8
7 Virtual Local Area Network (VLAN) ........................................................................................7-1
7.1 Basics.................................................................................................................7-1
7.2 Enabling the VLAN Web Pages in Web-Based Management............................7-1
7.2.1 Management VLAN ID ........................................................................7-2
7.2.2 Changing the Management VLAN ID .................................................7-2
7.3 General VLAN Configuration..............................................................................7-3
7.4 Current VLANs ...................................................................................................7-4
7.4.1 Static VLANs ...................................................................................... 7-5
7.4.2 VLAN Port Configuration .................................................................... 7-6
7.4.3 VLAN Port Configuration Table .......................................................... 7-7
7.5 Creating Static VLANs .......................................................................................7-7
7.5.1 Dynamic Configuration .......................................................................7-9
7.6 VLAN and (R)STP..............................................................................................7-9
8 Operating as a PROFINET Device..........................................................................................8-1
8.1 Preparing the Switch for PROFINET Mode........................................................8-1
8.2 Switch as a PROFINET IO Device.....................................................................8-2
8.2.1 Configuration in the Engineering Tool ................................................8-2
8.2.2 Configuring the Switch as a PROFINET IO Device ............................8-4
8.2.3 PROFINET Flashing Function ............................................................8-5
8.2.4 Naming the Device .............................................................................8-5
8.2.5 Operating in the PROFINET Environment ..........................................8-5
8.3 PROFINET Alarms.............................................................................................8-6
8.3.1 Alarms in WBM ...................................................................................8-6