User manual

FL SWITCH MM HS
4-4
PHOENIX CONTACT 6874_en_09
System
Figure 4-4 "System" menu
In this menu, you can add additional information in the white fields, which will be saved on
the MMS. This information is also available via SNMP and WBM.
If you modify the IP address and/or the other IP parameters using the Factory Manager,
once you click "OK" you will no longer have access via the Factory Manager. Restarting
the MMS activates the modified parameters and restores access.
To activate the new addresses following a restart, BootP must be activated in the MMS
(on the "IP Configuration" page in WBM).