User manual

Technical Data and Ordering Data
6874_en_09 PHOENIX CONTACT 11-5
11.2 Typical MMS Current Consumption (Example)
Mechanical Tests
Shock test according to IEC 60068-2-27 Operation: 25g, 11 ms period,
half-sine shock pulse
Storage/transport: 50g, 11 ms period,
half-sine shock pulse
Vibration resistance according to IEC 60068-2-6 Operation/storage/transport: 5g, 10 - 150 Hz, Criterion 3
Free fall according to IEC 60068-2-32 1 m
Conformance With EMC Directives
Noise emission according to EN 55011 Class A
Warning:
The limit values of the electromagnetic noise emission according to EN 55011, Class A are only observed by the module if it is installed in a grounded metal
control cabinet.
Radio interference field strengths according to EN 55022 Class A
Electrostatic discharge (ESD) according to EN 61000-4-2 Class 3; Criterion B
Electromagnetic fields according to IEC 61000-4-3 10 V/m; Criterion A
Conducted interference according to IEC 61000-4-6 10 V
RMS
; Criterion A
Fast transients (burst) according to IEC 61000-4-4 Data lines: 1 kV; Criterion A
Power supply lines: 2.2 kV; Criterion B
Surge voltages according to IEC 61000-4-5 Data lines: ±1 kV asymmetrical; Criterion B
Power supply lines: ±0.5 kV symmetrical/asymmetrical; Criterion B
Differences Between This Version and Previous Versions
Version 01: "Spanning Tree" section added; FL IF 2FX SM ... added
Version 02: Technical data for POF interface added
Version 03: Multicast filtering added, data for interface modules revised
Version 04: Extended multicast filtering added, improved handling described for the memory module
Version 05: VLAN and RSTP added, as well as new interface modules and GL certification
Version 06: Supplement for Environmental Category 1 added
Version 07/8: Functions and new features of firmware Version 4.0 and interface modules extended
Version 09: Functions and new features of firmware Version 4.50, interface modules and accessories extended
Typical Module Current Consumption
FL SWITCH MM HS [1] 350 mA
FL MXT [2] 250 mA
FL IF 2TX VS-RJ ... [3] 0 mA
FL IF 2HCS 100 ... [4] 100 mA
FL IF 2FX (SM) SC or ST ... [5] 200 mA
FL IF TX/POF 10/100 ... [6] 60 mA
FL IF TX/HCS 100 ... [7] 60 mA
FL IF MEM ... [8] 0 mA
FL IF 2PSE ... 30 mA (from MMS, additional 850 mA, maximum from external 48 V PoE
supply)
FL IF 2POF SCRJ-D 200 mA