User manual

Technical Data and Ordering Data
6874_en_09 PHOENIX CONTACT 11-1
11 Technical Data and Ordering Data
11.1 Technical Data
General Data
Function Modular Managed Ethernet/Fast Ethernet Switch; conforms to standard
IEEE 802.3
Switch principle Store-and-forward
Address table 8000 MAC addresses
SNMP Version 1 and 2c
Transmission capacity per port
64-byte packet size, half duplex
At 10 Mbps: 14,880 pps (packets per second)
At 100 Mbps: 148,800 pps
Supported MIBs MIB II, RMON MIB, bridge MIB, If MIB, Etherlike MIB, and Phoenix Contact
private SNMP objects
Housing dimensions (width x height x depth) in mm
Head station 214 x 95 x 107 (depth from top edge of DIN rail)
Head station with one extension module 341 x 95 x 107 (depth from top edge of DIN rail)
Head station with two extension modules 468 x 95 x 107 (depth from top edge of DIN rail)
Permissible operating temperature 0°C to +55°C
Permissible storage temperature -20°C to +70°C
Degree of protection IP20, DIN 40050, IEC 60529
Protection class Class 3 VDE 0106; IEC 60536
Laser protection - fiber optic interface modules Class 1 according to EN 60825-1
Humidity
Operation 10% to 95%, no condensation
Storage 10% to 95%, no condensation
Air pressure
Operation 80 kPa to 108 kPa, 2000 m above sea level
Storage 70 kPa to 108 kPa, 3000 m above sea level
Mounting position Perpendicular to a standard DIN rail
Connection to protective earth ground Snapped onto a grounded DIN rail
Weight of head station 1350 g, typical
Supply Voltage (US1/US2 Redundant)
Connection Via COMBICON; conductor cross section = 2.5 mm
2
, maximum
Nominal value 24 V DC (SELV)
Permissible voltage range 18.0 V DC to 32.0 V DC
Test voltage 500 V DC for one minute
Typical current consumption on US at 24 V DC 0.35 ... 3.25 A, depending on configuration
(extensions/interface modules)
Typical power consumption 8.4 W ... 78 W, depending on configuration
(extensions/interface modules); see example on page 11-5