User manual

FL SWITCH MM HS
8-6
PHOENIX CONTACT 6874_en_09
8.3 PROFINET Alarms
8.3.1 Alarms in WBM
In "PROFINET" mode, the "PROFINET Alarms" web page appears in the navigation bar
under "Switch Station/Diagnostics". Here, all alarms supported by the IO device can be
activated. The PROFINET alarms are sent to the control system by the IO devices. From
there they can be read from the diagnostics archive using "DIAG+" (Version 2.0 is included
in Service Pack 1 for PC WorX 5.00.26).
Figure 8-4 PROFINET alarms in WBM