User manual

FL SWITCH MM HS

8-4

PHOENIX CONTACT 6874_en_09

– One or more interface modules configured incorrectly -> Following startup, the MMS

indicates "Cd" (configuration difference) in the display

8.2.2 Configuring the Switch as a PROFINET IO Device

Once all switches have been added to the bus configuration, the following settings must

be made for the individual switches via the "Detail View" tab (device details):

– The PROFINET device name must be checked and modified, if necessary.

– The IP address and the subnet mask must be checked and modified, if necessary.

– The update time for inputs should be set to "512 ms" (default).

– The update time for outputs should be set to "512 ms" (default).

– The monitoring time should be set to "2000 ms" (default).

– The interface modules must be selected from the module catalog and added to the

station.

Figure 8-3 Device details with modified settings

If "Cd" appears in the display, insert the correct interface modules and restart the switch.

The desired/actual configuration is no longer monitored during the system runtime.

Set by the user:

Station name

IP address

Subnet mask

Recommended value