User manual

Multicast Filtering
6874_en_09 PHOENIX CONTACT 6-3
The group is added to the list of existing static multicast groups. This list, which is displayed
in a list box, is referred to as "dot1qStaticMulticastTable" in SNMP.
Port assignment After entering a new group in the "Multicast Group Address" field, add the ports of the
group members by selecting the corresponding checkboxes. Confirm by entering your
password and clicking on "Apply".
Because of the conversion from IP to MAC addresses, you should avoid using IP
addresses that differ with regard to the third byte from the right by 128. Example:
Both multicast IP addresses are converted into the multicast MAC address
01:00:5e:1e:75:d8.
Settings are not automatically saved permanently. The active configuration can be saved
permanently by selecting "Save current configuration" on the "Configuration
Management" web page.
1 s t m u l t i c a s t I P a d d r e s s : 2 2 8 . 3 0 . 1 1 7 . 2 1 6
2 n d m u l t i c a s t I P a d d r e s s : 2 3 0 . 1 5 8 . 1 1 7 . 2 1 6
3
r d b y t e
f r o m t h e r i g h t
D i f f e r e n c e : 1 1 2 8