User manual

FL SWITCH MM HS
5-4
PHOENIX CONTACT 6874_en_09
Now switch to the "(R)STP General" page in the "Switch Station" menu. Here, you will find
various information about the Spanning Tree configuration.
Figure 5-3 (R)STP General
The web page displays the parameters with which the switch is currently operating.
(R)STP Configuration
It is sufficient to set the Rapid Spanning Tree status to "Enable" in order to start (R)STP
using default settings. Priority values can be specified for the switch. The bridge and
backup root can be specified via these priority values.
Only multiples of 4096 are permitted. The desired value can be entered in the "Priority"
field. The value will be rounded automatically to the next multiple of 4096. Once you have
confirmed the modification by entering your password, the initialization mechanism is
started.
Redundant connections can now be created.