User manual

FL SWITCH MM HS
4-118
PHOENIX CONTACT 6874_en_09
The login screen indicates the version of the firmware used. A password must be entered
to make other settings. By default upon delivery, the password is "private". It is case-
sensitive. We strongly recommend that you change the password (via SNMP or WBM).
Basic Switch Configuration
Figure 4-52 IP configuration in the user interface
As well as displaying the set MAC address, this screen can be used to view or modify the
IP parameters.
This user interface screen can be used to determine the addressing mechanism or to
trigger a device restart.
In order to set the IP parameters, the "Static" option must be selected for "IP Parameter
Assignment".
All settings are transferred using "APPLY", but are not saved permanently. Use the
"SAVE" function to save the active configuration settings permanently.