User manual

Modular Managed Switch System
6874_en_09 PHOENIX CONTACT 1-5
1.1.2 Firmware Versions and Their Functions
Firmware Version 1.03 provides the standard switch functions.
In addition, firmware Version 1.11 supports the Spanning Tree redundancy mechanism.
Firmware 2.03 offers the following additional functions:
Multicast filter mechanisms
IGMP snooping and querier function
Memory module support
Firmware 2.10 offers the following additional functions:
Auto-refresh of various WBM pages
POF and FX interface module support
Extensive support and improved configuration handling of the memory module
Extended multicast filtering (multicast transmitters are detected and added to multicast
groups)
Extended IGMP snooping and IGMP query function (switch passively reads IGMP
membership reports, creates corresponding multicast groups, and sends IGMP
queries to multicast groups)
Visualization of port capacity
Port prioritization
Firmware 3.04 offers the following additional functions:
VLAN support
Rapid Spanning Tree support
Security options (port-based security and access control for WBM)
Optimization of the password concept
Event table (logging of important events)
Representation of MAC address table in WBM
Firmware 4.03 offers the following additional functions:
Optimized Rapid Spanning Tree Protocol (RSTP) (improved switch-over times)
Fast ring detection
Large tree support
Support of LLDP topology detection
DHCP support
DHCP with option 82 relay agent
PROFINET device function and DCP
Support of Power over Ethernet (IEEE 802.3af)
Simplified port configuration
IGMP query Version 1 and 2
Firmware 4.50 offers the following additional functions:
Support of the POF-SCRJ interface module and corresponding diagnostics
SNMP traps can be disabled individually
The VLAN for management can be set: VLAN ID to manage (web, SNMP, ping, IGMP
query) the switch in "VLAN Tagging" mode
DHCP relay agent can be disabled according to the port
PROFINET alarms and configuration comparison
Fast aging on link down