User manual

FL SWITCH MM HS
1-2
PHOENIX CONTACT 6874_en_09
Maximum availability Maximum network availability
A device design that does not use a fan, the redundant power supply, and conformance
with all relevant industrial standards in terms of EMC, climate, mechanical load, etc. ensure
the highest possible level of availability.
Redundancy can also be created with standards: the (Rapid) Spanning Tree Protocol
ensures the safe operation of the entire network regardless of topology, even in the event
of a cable interrupt.
All information Clear Information
You can label your device clearly using the large labeling field, and read operating states
and additional information from the two-digit 7-segment display. Two LEDs per port with
switchable information ensure that you always have sufficient local information. A web
server and an SNMP agent are provided for diagnostics, maintenance, and configuration
via the network. A terminal access point can be used for local operation.
Port mirroring Port mirroring can be used to monitor data traffic on the network connections.
Modularity Modular structure
Depending on your requirements, you can create a compact switch for the control cabinet
(with convenient connections on the front) or a switch for the terminal box (with
connections at the bottom). It is also possible to add a glass fiber interface or extend your
existing station from 8/16 ports to a maximum of 24 ports.
Figure 1-2 Possible system hardware