User manual

Configuration and Diagnostics
6874_en_09 PHOENIX CONTACT 4-33
The "Unlock" button can be used to disable the port block.
"Ports/Power over Ethernet Port Table" Menu
This menu displays the available PoE status information for each port.
Figure 4-40 "Power over Ethernet Port Table" web page
The following states are supported:
– No error
– Error in the external PoE supply voltage
– Temperature too high
– Current limitation activated
– Load disconnected
– The PoE controller does not respond, 48 V supply may be missing
– No PoE interface module inserted in this slot
– The switch does not support PoE interface modules
– No PoE devices connected to this port
– Port Power over Ethernet Configuration
"Last Source MAC Address" indicates the last MAC address that accessed the port. If
the port is blocked, the MAC address responsible for the block is indicated here.