Manual

DISASSEMBL Y

THIS PISTOL MUST BE IN THE UNLOADED CONDITION BEFORE DISASSEMBLY IS

PERFORMED (SEE UNLOADING PISTOL PAGE 10).

PLACE FIRING PIN BLOCK LEVER IN THE DOWNWARD POSI-

TION COVERING THE RED DOT. PLACE SAFETY IN THE

"SAFE" POSITION. DEPRESS MAGAZINE RELEASE BUTTON

AND REMOVE MAGAZINE.

PUSH ON REAR OF TAKE DOWN LEVER FORWARD TOWARDS

THE END OF THE BARREL AND LIFT BARREL END UP AND

OUT OF SLIDE AND FRAME.

TO REMOVE SLIDE. INSERT EMPTY MAGAZINE INTO PISTOL

AND MOVE SAFETY TO THE "FIRE" POSITION. MOVE SLIDE

FORWARD AND UP OFF OF FRAME. THIS PROCEDURE IS

SUFFICIENT FOR NORMAL CLEANING AND OILING OF THE

BARREL. SEE CLEANING INSTRUCTIONS.