Manual

UNLOADING PISTOL

WHILE REMOVING CARTRIDGE FROM BARREL CHAMBER. KEEP

THE PISTOL POINTED IN A SAFE DIRECTION. ROTATE FIRING

PIN BLOCK LEVER DOWN (CLOCKWISE) COMPLETELY

COVERING THE RED DOT. TAKE THE PISTOL IN YOUR RIGHT

HAND WITH A FIRM GRIP. MAKING SURE YOUR FINGERS ARE

NOT TOUCHING THE TRIGGER.

WITH YOUR OTHER HAND FIRMLY GRASP THE SERRATED

PORTION OF THE SLIDE AND PULL IT REARWARD AS FAR AS IT

WILL GO.

WITH THE SLIDE HELD AT ITS REARMOST POSITION. MOVE THE

SAFETY UPWARD TO THE "SAFE" POSITION.LOCKING THE SLIDE

IN THE OPEN POSITION. THIS SHOULD EXTRACT ANY

CARTRIDGE FROM THE BARREL CHAMBER.

THE MAGAZINE IS REMOVED BY DEPRESSING THE MAGAZINE

RELEASE BUTTON. REMOVE ALL CARTRIDGES FROM THE

MAGAZINE. CHECK MAGAZINE CAVITY AND BARREL CHAMBER

FOR ANY REMAINING CARTRIDGES. UNLOAD MAGAZINE

BEFORE REINSERTING. CAUTION: IF A LOADED MAGAZINE IS

REINSERTED INTO PISTOL A ROUND WILL BE CHAMBERED

WHEN CLOSING SLIDE.