manual

BLUETOOTH AT COMMAND LIST
7749_de_00 43
PHOENIX CONTACT GmbH & Co. KG • 32823 Blomberg • Germany • Phone: [phone]
PHOENIX CONTACT • P.O.Box 4100 • Harrisburg • PA 17111-0100 • USA • Phone: [phone]
www.phoenixcontact.com
9.1 Events
Serial_Connection_Data_Mode_Closed (*ADCCO)
channel32to47 Integer Bit mask used to enable or disable channels 32 to 47 (Bit 0 – Channel 32). De-
fault value is 0xFFFF.
channel48to63 Integer Bit mask used to enable or disable channels 48 to 63 (Bit 0 = Channel 48). De-
fault value is 0xFFFF.
channel64to78 Integer Bit mask used to enable or disable channels 64 to 78 (Bit 0 = Channel 64). De-
fault value is 0x7FFF.
store_in_startup_database enumerator 0: The setting will only be valid for the current power cycle.
1: The Serial Port Adapter will remember the setting between power cycles. The
settings database in the Serial Port Adapter will be updated.
Responses Description
<CR><LF>OK<CR><LF> Successful response
<CR><LF>ERROR<CR><LF> Error message.
Event Description
*ADCCO:<connection_handle>,<reason><CR><LF> A connection to a remote device has been disconnected.
Event Parameters Type Value
connection_handle integer Identifies the connection.
reason enumerator 0: Disconnected by command
1: Disconnected by link loss
255: Reason unknown