manual

BLUETOOTH AT COMMAND LIST

7749_de_00 PHOENIX CONTACT 34

Write_Max_Output_Power (AT*AMMP=)

Read_Esc_Sequence_Timing (AT*AMET?)

AT Command Description

AT*AMMP=<max_output_power>,

<store_in_startup_database><CR>

Set the maximum output power to be used by the Serial Port

Adapter when communicating.

Command Parameters Type Value

max_output_power integer See Read_Max_Output_Power.

store_in_startup_database enumerator 0: The setting will only be valid for the current power cycle.

1: The Serial Port Adapter will remember the setting between power cycles. The

settings database in the Serial Port Adapter will be updated.

Responses Description

<CR><LF>OK<CR><LF> Successful response

<CR><LF>ERROR<CR><LF> Error message.

AT Command Description

AT*AMET?<CR> For an escape sequence to be valid, a period of no data ac-

tivity is required before and after the escape sequence. This

command reads the minimum time of no data activity re-

quired before and after the escape sequence.

Responses Description

Successful response

<CR><LF>ERROR<CR><LF> Error message.

Response Parameters Type Value

min_before_time integer 50-5000 ms.

The default value is 1000.

min_after_time integer 50-5000 ms.

The default value is 1000.