manual

BLUETOOTH AT COMMAND LIST

7749_de_00 PHOENIX CONTACT 33

Write_Controller_Power_Save_Mode (AT*AMPM=)

Read_Max_Output_Power (AT*AMMP?)

AT Command Description

AT*AMPM=<mode>, <store_in_startup_database><CR> This command writes a new power save mode setting to the

Serial Port Adapter.

Command Parameters Type Value

mode enumerator See Read_Controller_Power_Save_Mode.

store_in_startup_database enumerator 0: The setting will only be valid for the current power cycle.

1: The Serial Port Adapter will remember the setting between power cycles. The

settings database in the Serial Port Adapter will be updated.

Responses Description

<CR><LF>OK<CR><LF> Successful response

<CR><LF>ERROR<CR><LF> Error message.

Module Constraint

FL BT SPA Online 32 MHz mode (4) is not supported.

Stop mode cannot be configured if the DSR mode is 2 (see

AT*AMDS).

AT Command Description

AT*AMMP?<CR> Read the maximum output power used by the Serial Port Ad-

apter when communicating.

Responses Description

Successful response

<CR><LF>ERROR<CR><LF> Error message.

Response Parameters Type Value

max_output_power integer 255: Use the highest output power supported by the Serial Port Adapter as the

maximum output power (default value).

128-m: -m dBm (m<30)

128: 0 dBm

128+n: n dBm (n<30)