manual

BLUETOOTH AT COMMAND LIST
7749_de_00 PHOENIX CONTACT 28
Write_Wireless_Multidrop_Configuration (AT*ADWM=)
8 Informational Commands
Read_Local_BD_ADDR (AT*AILBA?)
Read_Local_Version_Information (AT*AILVI?)
AT Command Description
AT*ADWM=<enable>, <auto_forward>,
<store_in_startup_database><CR>
See Read_Wireless_Multidrop_Configuration.
Command Parameters Type Value
enabled enumerator See Read_Wireless_Multidrop_Configuration.
auto_forward enumerator See Read_Wireless_Multidrop_Configuration.
store_in_startup_database enumerator 0: The setting will only be valid for the current power cycle.
1: The Serial Port Adapter will remember the setting between power cycles. The
settings database in the Serial Port Adapter will be updated.
Responses Description
<CR><LF>OK<CR><LF> Successful response.
<CR><LF>ERROR<CR><LF> Error response.
AT Command Description
AT*AILBA?<CR> Reads the Bluetooth Device Address of the local device.
Responses Description
<CR><LF>*AILBA:<bd_addr>,<CR><LF>OK<CR><LF> Successful response
<CR><LF>ERROR<CR><LF> Error message.
Response Parameters Type Value
bd_addr Bd_Addr Local Bluetooth device address.
AT Command Description
AT*AILVI?<CR> This command reads the local version information to the Se-
rial Port Adapter.
Responses Description
<CR><LF>*AILVI:<manufacturer>, < sw_ver>,
<host_stack_sw_ver>, <link_manager_sw_ver>,
<bluetooth_hardware_manufacturer><CR><LF>OK<CR><
LF>
Successful response
<CR><LF>ERROR<CR><LF> Error message.