F4U Corsair Manual

F4U CORSAIR
Instruction Manual
8
Assemble left and right
sides the same way
8. Insert the 90 degree bend down through the hole in
the servo arm. Install one nylon snap keeper over
the wire to secure it to the arm. Install the servo
arm retaining screw and remove the masking tape
from the aileron.
9. Repeat step # 4 - # 8 to install the second aileron
linkage. After both linkages are completed,
connect both of the aileron servo leads using a
Y-harness you have purchased separately.
Aileron
Flap
Horn Horn
Horn
Horn
2
2
Cut off shaded portion
Apply instant glue
(CA glue, super glue).
Horn
Horn
Cut away film only here
Pull out servo cord with string.