PC-21 Pilatus Mk2 GP EP Gas ARF Manual

PC21 PILATUS MK2
Instruction Manual
36
3x15mm
3x12mm TP Screw
3
INSTALLING THE SPINNER
Install the spinner back-plate, propeller and
spinner cone.
The propeller should not touch any part of the
spinner cone. If it dose, use a sharp modeling
knife and carefully trim away the spinner cone
where the propeller comes in contact with it.
!
Use the spacer
suitable for a shaft.
Propeller
Spinner
Spinner
Must be purchased
separately!
3x12mm