PC-21 Pilatus Mk2 GP EP Gas ARF Manual

PC21 PILATUS MK2

Instruction Manual

Silicone

Throttle Lever

Choke Lever

Silicone

INSTALLING THE THROTTLE

Plug the throttle servo into the receiver and turn on

the radio system. Check to ensure that the throttle

servo output shaft is moving in the correct

direction. When the throttle stick is moved forward

from idle to full throttle, the throttle barrel should

also open and close using this motion. If not,

reverse the direction of the servo, using the

transmitter.

Connector

Apply threadlocker (screw cement).

Ensure smooth, non-binding movement

when assembling

Throttle Servo

Cut off shaded portion

Must be purchased separately!

4x4mm

Adjust the throttle input (transmitter throttle stick),

throttle trim movement and the carburattor opening

to the suitable position and screw in the 4x4mm set screw.