1:4 3/4 Piper J-3 Cub GP/EP Gas ARF Manual

INSTALLING THE ENGINE
Locate the long piece of wire used for the throttle
pushrod. One end of the wire has been pre-bend
in to a "Z" bend at the factory. This "Z" bend
should be inserted into the throttle arm of the
engine when the engine is fitted onto the engine
mount. Fit the engine to the engine mount using
the screws provided.
Must be purchased
separately!
PIPER J3 CUB
Instruction Manual
25
OS 120 AX
4x30mm
4mm
4mm
Throttle rod
Throttle rod
145mm
1
1
1.2x500mm Throttle rod
350mm PP Pipe
4 x 30mm Screw
4mm Nut
4
8
4
4mm Spring Washer