1:4 3/4 Piper J-3 Cub GP/EP Gas ARF Manual

Instruction Manual
1
Thank you for purchasing Phoenix Model products. With over 20 years experience in production and fly testing,
Phoenix Model is committed to bring the best quality products and good service to customers. Along with a team of
creative engineers and skilled workers, we will always accompany with customers by our great experiences, fully
enthusiasm... which will burn our passion!! Joining with us to explore and conquer challenges in the sky ...
Your satisfaction is our success.
Please read through this manual before starting construction.
Academy of Model Aeronautics
5151 East Memorial Drive Muncie, IN 47302-9252
Tele. (800) 435-9262
Fax (765) 741-0057
Academy of Model Aeronautics: If you are not already a member of the AMA, please join! The AMA is the
governing body of model aviation and membership provides liability insurance coverage, protects modelers’
rights and interests and is required to fly at most R/C sites.
TABLE OF CONTENTS
INTRODUCTION
Or via the Internet at: http://www.modelaircraft.org
....................................................
........................................................
......................................................
............................................
....................................
.....................................................
................................................
................................................
.................................................
.............................
..................................
...................................................
..........................
................
..............
.........................
..........................
....................................
..........................
..............................
.............................
...........................
Introduction
Warranty
Disclaimer
Safety precaution
Important building notes
Suggestion
Flight warnings
Flight warnings
Covering tools
Adhesives and required tools
Academy of model aeronautics national
model aircraft safety code
Preparations
Installing the ailerons and flaps
Installing the ailerons and flaps servos
Installing the ailerons and flaps linkages
Secure the wing to the fuselage
Installing the main landing gear
Installing the wing strut
Horizontal stabilizer installation
Vertical stabilizer installation
Installing the rudder pushrod
Installing the elevator pushrod
1
2
2
2
2
2
2
3
3
3
3
5
5
6
7
9
9
10
11
12
14
16
.....................................
.......................
...............................
......................................
....................
.........................................
........................................
............................................
...........................................
.......................
.........................................
..................................
........................
..............................
Installing the tail wheel
Installing the horizontal stab strut
Installing the engine mount
Installing the fuel tank
Installing the throttle pushrod servo
Installing the engine
Installing the throttle
Installing the pilot
Mounting the cowl
Installing the receiver and battery
Installing the switch
For your radio installation
Basic connection for airplane
And adjustment of servos
Flight preparation pre flight check
Main gear dimensional detail
19
21
22
23
24
25
27
30
28
........................................
Mounting the spinner 29
30
30
.............
Installing the electric motor ( ep version ) 32
37
...............................................
Lateral balance 35
.......................................................
Balancing 35
................................................
Control throws 35
37
38
................................
Tail gear dimensional detail 38
.................................................
Exploded view 40
.................................................
Exploded view 41
PIPER J3 CUB